Miscellaneous Tips and Tricks
Welcome to the world first absolutely free online adviser who looking after job, money, yoga, skin care,work at home ,Air ticket booking, Railway booking,Astrology,Daily share market & many more. Please have a look around, we offer various help topics including A to Z your 24 X 7 day of week.Enjoy it
http://www.blendbenefit.blogspot.com
No operating system is truly 100% stable. However, with routine maintenance, you should achieve moderate stability. Nevertheless, some programs may freeze now and then, and depending upon the error, one may have to reboot their system. Rebooting can take time, especially if your system is slow or if you have many programs that load automatically. You may be able to avoid rebooting by logging out and then re-logging back into Windows. When you do this, Windows will reload the registry and a few system files. Therefore, this technical brief will show you how to quickly log out and then re-log back into Windows.
For Windows XP
Begin by first clicking on the Start Button.
Then locate the Log Off icon at the bottom of the Start Menu and Click on it.
This Log Off icon will contain the name assigned to your system when Windows was installed.
Windows XP will display the Log Off Windows window with choices to Switch User or Log Off.
Click on the Log Off icon to the right with your mouse to Log Off of Windows.
Windows will briefly shut down and restart quickly and then ask you to click on your User name.
Click on your User Name located on the right hand side of the screen to Log back into Windows.
If you normally enter a password when Windows XP starts up, You’ll be asked to enter this here.
Windows will now Log you back onto your system and should recover from your experienced error.
For Windows 98 And Windows Millennium
Begin by first clicking on the Start Button.
Then locate the Log Off icon at the bottom of the Start Menu and Click on it.
This Log Off icon will contain the name assigned to your system when Windows was installed.
Windows will then ask you if you are sure that you want to log off.
Click on the Yes button with your mouse to Log Off of Windows.
Windows will now display the Log On window with your user name and ask for a password.
Practically every home user will simply click on the OK button to bypass entering information.
However, if you’re usually see this Log On Window at start up then do what you normally do here.
Windows will now Log you back onto your system and should recover from your experienced error.
Repair Your Computer With A Few Clicks of The Mouse
Has your computer’s stability become an absolute nightmare? Is your system moving at a very slow pace? Do you keep receiving mysterious error messages that appear out of nowhere and crash your system? Almost all computer problems can be resolved with a few clicks of the mouse! The most common registry issues have been isolated and any of the below software programs will search for these errors and report the problems being caused. You don’t need a new computer, and you don’t need a high-priced technician! If your system performance is less than optimal, then you can not afford not to scan your computer now!
Top Rated Registry Cleaners And Error Repair Software
If you shut down your Windows XP-based computer, your computer may restart inst...
If you shut down your Windows XP-based computer, your computer may restart instead of shutting down. The computer may also restart unexpectedly while you are using the computer to perform certain tasks. An error message may appear on a blue screen when the computer restarts.
This behavior may occur if Windows stops responding during a typical operation...
This behavior may occur if Windows stops responding during a typical operation or during the shutdown process. By default, the computer is configured to automatically restart when Windows stops responding. To view this setting, follow these steps:
Click the Start button, right-click My Computer, click Properties, click the Advanced tab, and then click Settings under Startup and Recovery.
Under System Failure, view the Automatically restart check box. If the Automatically restart check box is selected, Windows automatically restarts if the computer stops unexpectedly.
If your computer constantly restarts while you are using it, or if you are tryi...
If your computer constantly restarts while you are using it, or if you are trying to shut down the computer after it has stopped unexpectedly, click to clear the Automatically restart check box. If you clear this check box, you receive an error message when the computer stops responding. This error message may describe the cause of the problem. You can also review the system log in Event Viewer to view the critical stop error that occurs when the computer restarts. For additional information, click the following article number to view the article in the Microsoft Knowledge Base:
308427 (http://support.microsoft.com/kb/308427/ ) HOW TO: View and manage event logs in Event Viewer in Windows XP
To configure the way that Windows responds when the computer stops unexpectedly, follow these steps.
Note: You must be logged on as an administrator or a member of the Administrators group to complete this procedure. If your computer is connected to a network, network policy settings may prevent you from completing this procedure.
Log on to the host computer as either an administrator or the owner.
Click Start, and then click Control Panel.
Under Pick a category, click Performance and Maintenance.
Under the or pick a Control Panel icon section, click System.
Click the Advanced tab, and then click Settings under Startup and Recovery.
Click to select any one of the following check boxes under System Failure:
By default, the Automatically restart check box is selected so that you can con...
By default, the Automatically restart check box is selected so that you can continue to use the computer if a critical stop error occurs. Microsoft Services starts during the startup process before you log on. Therefore, the computer is functional after it restarts. If the computer stops because of a critical stop error, you lose all functionality, including the remote access functionality. After the computer restarts, you can investigate the reason for the stop error.
The stop error message only displays information about the possible cause of the critical stop error. In most situations, the error is logged in the system log.
Configure Windows to perform the following actions if a severe error such as a stop error or fatal system error occurs:
Write an event to the system log.
Notify administrators.
Automatically restart the computer.
Dump system memory to a file that advanced users can use for debugging.
You must have at least a 2-megabyte (MB) paging file on the computer's boot volume if you want to configure the computer to either write an event to the system log or notify an administrator. If you configure Windows to create a dump file that contains the system memory data, you can use the dump file to debug the cause of the stop error.
To configure Windows to create a dump file, follow these steps:
Log on to the host computer as either an administrator or the owner.
Click Start, and then click Control Panel.
Under Pick a category, click Performance and Maintenance.
Under the or pick a Control Panel icon section, click System.
Click the Advanced tab, and then click Settings under Startup and Recovery.
Under Write Debugging Information, click one of the following entries:
Small Memory Dump: If you click this setting, the smallest amount of information that helps you identify the problem is recorded. This setting requires that you have at least 2 MB available for a paging file on the boot volume of your computer. If you click this setting, Windows creates a new file every time that the computer stops unexpectedly. A history of these files is stored in the folder that is listed in the Dump File box.
Kernel Memory Dump: If you click this setting, only kernel memory is recorded. This speeds up the process of recording information in a log when the computer stops unexpectedly. Depending on the random-access memory (RAM) in your computer, you must have 50 MB to 800 MB available for the paging file on the boot volume. The file is stored in the folder that is listed in the Dump File box.
Complete Memory Dump: If you click this setting, the contents of the system memory are recorded when the computer stops unexpectedly. If you use this setting, you must have a paging file on the boot volume that is sufficient to hold all of the physical RAM plus one MB. The file is stored in the folder that is listed in the Dump File box.
Windows always writes to the same file name. To save individual dump files, click to clear the Overwrite any existing file check box, and change the file name after each stop error.
To save memory, click to clear both the Write an event to the system logSend an administrative alert check box. The memory that is saved depends on the computer. Typically, these debugging features require about 60 kilobytes (KB) to 70 KB of RAM. check box and the
Back to the top
No comments:
Post a Comment